Category Archives: TK103 SMS commands

TK103 user manual Set Monitor Mode

TK103 user manual How to Set Monitor Mode?

Now to set monitor to TK103 Tracker is easy,

You can set How your client can track Vehicle.
Only Register user can track Your Vehicle?
All User can track your Vehicle?
or No one can monitor your vehicle?

Easy to switch between any mode at any time.

1> All Monitor mode:
Send SMS
“AllMonitor” to Tk103 device
In this mode any one can monitor vehicle.

2> Restrict to authorized Member
Send “RestrictMonitor”
In this mode authorized user can only track the truck or vehicle

3>Close for all
Send “CloseMonitor”
In this mode no one can track the vehicle.

TK103 SMS COMMANDS FOR CONTROL CIRCUIT

TK103 SMS commands for Control CIRCUIT

Remote control oil and circuit of TK103 GPS Tracker devices help user to stop circuit supply any time from any where.

When every Fleet owner feel that the vehicle is not safe going in wrong direction or road at the any point or time driver is giving wrong information.
Stop CIRCUIT supply and check at their location just by sending SMS commands to TK103 GPS tracker.

Just One command Stop CIRCUIT supply and also for start CIRCUIT supply again just one command to GPS tracker TK103 needed.

Have a look to command,

Send SMS “stopelec+password” to control oil. For example send SMS:stopelec123456
To supply the oil again, send SMS “supplyelec+password” to the unit.

“stopelec+password” = stopelec123456

Where,
stopoil is stand for SMS command of gps tracker
123456 is the password.

And start oil supply again

“supplyelec+password”

supplyelec123456

Where,
supplyelec is stand for SMS command of gps tracker
123456 is the password.

Thanks

TK103 SMS commands for Control Oil

TK103 SMS commands for Control Oil

Remote control oil and circuit of TK103 GPS Tracker devices help user to stop Oil supply any time any where.

When every Fleet owner feel that the vehicle is not safe at the any point or driver is giving wrong information.
Stop Power supply and check at their location just by sending SMS commands to TK103 GPS tracker.

Just One command Stop Oil supply and also for start Oil supply again just one command to GPS tracker TK103 needed.

Have a look to command,

Send SMS “stopoil+password” to control oil. For example send SMS:stopoil123456
To supply the oil again, send SMS “supplyoil+password” to the unit.

“stopoil+password” = stopoil123456

Where,
stopoil is stand for SMS command of gps tracker
123456 is the password.

And start oil supply again

“supplyoil+password”

supplyoil123456

Where,
supplyoil is stand for SMS command of gps tracker
123456 is the password.

Thanks